HAMRADIOLIST STATION SERVICES

Remote Rig Control

Take your station with you. Hear your receiver, tune the VFO, change bands and modes, view real-time signal reports, start the antenna tuner and use your phone as the radio microphone.

Open Remote Rig Open Station Bridge

Real two-way audio

Listen to the radio through your phone and send phone-microphone audio back to the radio USB/DATA input while PTT is held.

Real VFO dial

Tune smoothly with a touch-friendly VFO knob, selectable steps, frequency entry and band shortcuts.

Live S-meter

See incoming signal strength in real time for quick and accurate signal reports.

Momentary PTT

Press and hold to transmit. Safety release protection returns the radio to receive if the connection is interrupted.

Rig controls

Change modes, frequencies and bands, refresh radio state and use supported tuner commands.

Mobile and fullscreen

Use a phone, tablet or computer with a responsive full-screen console.

How it works

1
Connect the radio to your station computer

2
Open Station Bridge and choose USB audio

3
Open Remote Rig on another device

4
Listen, tune and transmit securely

FT-710 transmit audio: choose the FT-710 USB Audio playback device in Station Bridge and configure the radio’s DATA/USB modulation input for USB audio. The new TX-audio meters on both devices show whether your phone voice is reaching the station computer.